Tile and Metal Roof Membrane Matt finish – 20L

Tile and Metal Roof Membrane Matt finish – 20L

100% Acrylic Membrane with UV blocking pigmentation – Matt finish.

$184.25

Clear
SKU: 16MATT Category: Tag:
  • Description
  • Additional information
  • Safety Data Sheet (SDS)
  • Product Data Sheet (PDS)

Description

Sunbond Low Sheen Roof Membrane

Roofshield Protective Membrane is an advanced technology adhesion promoted 100% Acrylic Membrane with UV blocking pigmentation. Formulated to meet Australian conditions as a durable long life roof finish. It has excellent gloss retention, colour fastness and lasting good looks.

This tough flexible finish is an extended durability product designed for the long-term protection and decoration of domestic and commercial roofs.

Intended Uses:

As a low sheen protective membrane coating for all types of new, restored, and refurbished roofs including cement tile, terracotta, galvanised iron, zinc-alume, and fibrous cement.

The Low Sheen finish is ideal for Metal Roofs with blemishes and Cement Tile roofs that are bowing.

 

Properties:

Exterior durability: Excellent
Colour availability: Wide Colour Range
Washability: Excellent
Coverage: Up to 4 square metres per litre
Number of Coats: 2 coats recommended
Recoat time: 2 hours in normal conditions (Longer should be allowed in damp, humid, or cold conditions)
Clean Up: Water

Surface Preparation

  • New Roofs
    Remove all dust, dirt, oil, grease, and other contaminants. Degrease new galvanised iron. Check and repair pointing of tile roofs.
  • Weathered Roofs  – Not Asbestos or “Fibro” roofs
    Water blast clean, scrape or abrade to remove all dust, dirt, chalk, fungus, algae, deposits, and other contamination.

All bare surfaces must be primed with the recommended primer or sealer before application of SUNBOND LOW SHEEN ROOF MEMBRANE.

Priming Coats:

Surface: Recommended Primers
Cement tile: Sunbond Primer or Sealer
Galvanised Iron, Zinc Alume, Aluminium: Sunbond Gal Iron Primer
Fibrous Cement, Fibro, Asbestos Cement: Sunbond Fibro Seal
Iron and Steel: Anticorrosive Metal Primer

 

  • Previously Painted Surfaces
    Thoroughly prepare surface – remove all unsound paint. Prime bare surface as above.

Application:

  • May be applied directly to correctly prepared previously painted surfaces in sound condition.
  • TWO full coats recommended
  • ​​​​​​Apply using Airless Spray equipment.
  • ​​​​​​Apply liberally by brush to restricted areas.
  • ​Ensure adequate ventilation during use.

CONTROL OVERSPRAY – DO NOT CONTAMINATE OTHER AREAS OR PROPERTY.

 

OTHER INFORMATION

Stir well before use. Do not apply at surface temperatures below 10 or above 45 degrees Celsius. Cease application if surface dry time exceeds 60 minutes. Do not apply if rain or moisture condensation is imminent. Finish application by 3pm if overnight dew is expected. Do not coat roofs in windy conditions.

Additional information

Weight 20 kg
Colour

ASH, Basalt, BEIGE, BLUE STEEL, BROWN 610, BROWN 660, BROWN 686, CHARCOAL, COTTASAND, DUBBO, EBONY, FAWN, GUM, HERITAGE GREEN, INDIAN RED, Ironstone, LEAF, LIGHT GREY, MID GREY, Monument, MOUNTAIN BLUE, MURBAU, OUTBACK, PALE TERRACOTTA, RED, RUST, SANTE FE, SLATE, SMOOTH CREAM, VALENCIA

SUNBOND ROOF MEMBRANE – WHITE & COLOURS - Material Safety Data Sheet:

>> ROOF MEMBRANE SDS 902

ROOFSHIELD COATINGS ROOF MEMBRANE

LONG LIFE 100% Acrylic – Adhesion promoted Membrane Coating specifically formulated for the protection of Australian Roofs. Available in a popular range of roofing colours. 

100% ACRYLIC based on methyl methacrylate with its proven outstanding durability, flexibility, and long established resistance to weathering.

WATERPROOFS and seals the tile surface against rain and weather. 

U.V RESISTANT High resistance to the degrading effect of Ultra Violet Light and Solar Radiation.

FUNGUS AND MOULD RESISTANT The Mehyl Methacrylate Acylic Polymer with additional specific fungicides and algaecides protect against growth of fungus, alge, and mosses making it very difficult for these disfiguring organisms to get a foot hold. 

RESISTS DIRT COLLECTION, ROOFSHIELD COATINGS ROOF MEMBRANE develops early water resistance in the coating. Rain then preferential;ly wets dust particles helping to flush them away.

PERMANENT COLOURS The coating is formulated using only long proven and established permanent colours including iron and other oxides and light fast pigments. The coating finish substantially maintains its colour and is highly resistant to colour fade or colour change. 

MANUFACTURED using 100% Acrylic chemicals and raw materials supplied by Rohm and Haas, Orica, Thor Chemicals, Bayer, and other large global chemical industry suppliers accredited under the international standards of quality assurance ISO 9001 and 9002. CONFORMS TO AUSTRALIAN STANDARDS AS 3370.20 and AS 2311 for roof coatings. 

 

APPLICATION TO CEMENT TILES: 

ONE COAT ROOFSHIELD COATINGS CEMENT TILE PRIMER / SEALER

The primer has two important functions; it penetrates, seals, and adheres to the tile surface ensuring the long-term adhesion of the whole coating system. A powerful fungicide/algaecide incorporated in the sealer sterilizes the tile surface and very importantly is retained by the sealer to kill off any fungi spores hidden deep within the tile pores. 

TWO COATS ROOFSHIELD COATINGS ROOF MEMBRANE – COLOUR COATS Two heavy coats are applied to ensure complete cover and maximum durability. 

COVERAGE RATE: 100 Litres of Roofshield Roof Membrane plus 40 litres of Cement Tile Primer/Sealer are normally applied to the average 200 square metre tiled roof. 

ENVIRONMENTALLY FRIENDLY WATER BASED ROOF COATING SYSTEM