Fungicide Wash – 20L

Fungicide Wash – 20L

Eco friendly fungal remover from porous tiles that are hard to wash with just water. [20L]

$75.57

SKU: 195FUN Category: Tag:
  • Description
  • Additional information
  • Product Data Sheet (PDS)

Description

Sunbond Fungicide Wash

Description:

A low toxicity water based fungicidal wash to sterilise and kill fungus and micro organisms on roofs and other surfaces before application of coatings.

SUNBOND FUNGICIDE WASH contains the active ingredients cationic amine & isothiazolinone. (appropriate R & S Phrases: R36/37/38-41-43 & S13-24/25-26-27- 28(water)-36/37/39). These substances are not subject to known recognised exposure limits.

It has broad spectrum activity and is effective in the treatment of bacteria, yeasts, fungi, and algae which are the common cause of unsightly growths on fibrous cement roofs and other surfaces.

Intended Uses:

For the treatment and killing of fungus and other disfiguring growths on fibrous cement roofs.

As the critical fungus treatment of the SUNBOND COATING System for the refurbishment of old (Fibro) and fibrous cement roofs.

As a general fungicide or mildewcide for most surfaces.

Application:

Apply as supplied by spray or brush.

Cautions:

Whilst this is a low toxicity product normal care and good practice in handling chemical substances should be exercised.
Avoid breathing the vapour if applying by spray. Goggles and breathing protection is recommended.

Avoid contact with eyes and skin. (Wash any contamination with clean water) Do not allow overspray to drift towards windows and doors.
Do not add to paints.
Do not dispose of in drains, in gardens, or on grass or lawns.

Disconnect roof from water tanks before application and thoroughly hose and wash gutters and downpipes before reconnection.

Allow to act and dry a minimum of 24 hours before application of sealers or paints.

 

Additional information

Weight 20 kg

ROOFSHIELD FUNGICIDE WASH

DESCRIPTION: A low toxicity water based fungicidal wash to sterilise and kill fungus and micro-organisms on roofs and other surfaces before application of coatings. 

ROOFSHIELD FUNGICIDE WASH contains the active ingredients cationic amine and isothiazolione. (appropriate R & S Phrases: R36/3738-41-43 & S 13-24/25-26-27-28 (water) – 36/37/39). These substances are not subject to known recognised exposure limits.

It has broad spectrum activity and is effective in the treatment f bacteria, yeasts, fungi, and algae which are common cause of unsightly growths of fibrous cement roofs and other surfaces. 

 

INTENDED USES 

For the treatment and killing of fungus and other disfiguring growths on fibrous cement and other types of roofs. 

As the critical fungus treatment of the refurbishment of old fibrous cement roofs. 

As a general fungicide or mildewcide for most surfaces. 

 

APPLICATION 

Apply as supplied by spray or brush. 

Fibrous cement roofs must be saturated with ROOFSHIELD FUNGICIDE WASH to ensure full penetration into the surface to kill fungus and algae growths. 

 

CAUTIONS 

  • Whilst this is a low toxicity product, normal care and good practice in handling chemical substances should be exercised. Avoid breathing the vapor if applying by spray. Goggles and breathing protection is recommended.
  • Avoid contact with eyes and skin. (wash any contamination with water)
  • Do not allow overspray to drift towards open doors and windows. 
  • Do not add to paints or coatings. 
  • Do not dispose of in drains, in gardens, or on grass or lawns.
  • Disconnect roof from water tanks before application and thoroughly hose and wash gutters and downpipes before reconnection.
  • Allow to act a minimum of 24 house before application of primers, sealers, or other coatings. Treated surface must be dry before the application of coatings. 

Refer Material Safety Data Sheet. 

OTHER INFORMATION 

Operators are advised to consult relevant authorities to ensure compliance with legislation and local regulations before starting works on asbestos containing roofs.