Cement Tile Primer – 20L

img-2029-600×450-wfqfkovxnsjq

Cement Tile Primer – 20L

Water based, methyl methacrylate, adhesion promoted acrylic primer for application to cleaned cement tiles as the first coat of the Sunbond Tile Restoration Coating system [20L]

$142.23

SKU: 12PRI Category: Tag:
  • Description
  • Additional information
  • Safety Data Sheet (SDS)
  • Product Data Sheet (PDS)

Description

Sunbond Cement Tile Primer

Primer is the first coat of the Cement Tile Roof Coating System and is the ‘Key Coat’ which is the all-important adhesion coat. This anchors the roof coating system to the cleaned tile surface. It dries clear when applied and is suited to slightly worn tile surfaces. Cement tile primer also contains strong fungicide/algaecide to kill and prevent the growth of fungi spores which may be hidden deep within the tile surface.

Water based, methyl methacrylate, adhesion promoted acrylic primer for application to cleaned cement tiles as the first coat of the Sunbond Tile Restoration Coating system. SUNBOND CEMENT TILE PRIMER is formulated to penetrate into the cleaned and prepared tile surface and seal and prepare the tile for the following colour coats of SUNBOND ROOF MEMBRANE.

SUNBOND CEMENT TILE PRIMER utilises powerful surface active agents and water miscible solvents to promote effective wetting and penetration into the cement tile surface to ensure long term adhesion of the entire coating system.
This primer also contains a strong fungicide / algaecide to kill and prevent growth of fungi spores which may be hidden deep within the tile surface.

Properties

Gloss level: Conforms to AS 2311 – Semi Gloss
Exterior durability: Excellent when overcoated
Colour: Clear
Coverage: Varies with surface (eg 6sq M/L)
Number of Coats: 1 full coat recommended
Recoat time: 2 hours in normal conditions
Thinning: not normally necessary
Clean Up: Water

 

Surface Preparation

Refer to suggested Work Procedures for Cement Tile Roofs.

Water blast and clean tiles using a 3,000psi machine. Ensure all dirt, fungus, and other deposits are fully removed. Ensure loose and degraded old tile surface is removed. Pay attention to effective cleaning of the noses of tiles taking care not to force water up under tiles on to ceilings or soffits. (Lower power machines are considered ineffective in removing loose tile surface and are not recommended)

Previously Painted Surfaces

Not applicable

Application

Apply by airless spray in a single wet penetrating coat.

OTHER INFORMATION

Stir before use. Surface must be dry before application. Do not apply at surface temperatures below 10 degrees Celsius.

Additional information

Weight 20 kg

SUNBOND CEMENT TILE PRIMER - Material Safety Data Sheet:

>> Cement Tile Primer_MSDS P 0314

DESCRIPTION:

A water based 100% Acrylic adhesion primer for application to prepared and cleaned cement tiles as the first coat of the tile restoration coating system. ROOFSHIELD CEMET TILE PRIMER is formulated to penetrate and bond with the tile surface and seal and prepare the tile for the following colour coats of ROOFSHIELD ROOF MEMBRANE. 

SUNBOND CEMENT TILE PRIMER utilizes powerful surface active agents and water miscible solvents to promote effective wetting and penetration into the cement tile surface to ensure long term durability of the e

 

PROPERTIES

Property Description
Gloss level Conforms to AS 2311 - Semi Gloss
Exterior durability Excellent when overcoated
Colour Clear
Coverage Varies with surface (eg 6sq M/L)
Number of Coats 1 full coat recommended
Recoat time 2 hours in normal conditions
Thinning Not normally necessary
Clean Up Water

 

SURFACE PREPARATION 

Refer to suggested Work procedures for Cement Tile Roofs. 

Water blast and clean tiles using a 3,000psi machine. Ensure all dirt, fungus and other deposits are fully removed. Ensure loose and degraded old tile surface is removed. Pay attention to effective cleaning of the noses of tiles taking care not to force water up under tiles on to ceilings or soffits. (Lower power machines are considered ineffective in removing loose tile surface and are not recommended.)

Previously Painted Surfaces - Not Applicable 

Application - Apply by airless spray in a single wet penetrating coat. 

 

OTHER INFORMATION 

Stir before use. Surface must be dry before application. Do not apply at surface temperatures below 10 degrees Celsius. 

Related Products