Heat Shield Membrane – 20L

SUNBOND-heatshield-Membrane-640×480
Sunbond-colours-1280×960
SUNBOND-heatshield-Membrane-640×480
Sunbond-colours-1280×960

Heat Shield Membrane – 20L

HEAT SHIELD is a high build heat reflective roof coating specifically formulated to minimise roof temperatures by reflecting solar heat.

$231.00

Clear
Add to quote
SKU: 19HEA Category: Tag:
  • Description
  • Additional information
  • Safety Data Sheet (SDS)

Description

HEAT SHIELD 10 incorporating micro void cells keeps it cooler inside by repelling the sun’s radiation and controlling heat entering through the roof. This tough flexible dirt resistant coating is an extended durability product designed to give long life protection to all types of roofs.

Developed and manufactured in Australian to meet harsh Australian conditions HEAT SHIELD 10 can reduce the surface temperature of traditional red, brown, or green roofs by as much as 20 degrees Celsius in the summer heat.

Intended Uses:

As a high build durable heat reflective coating for domestic and commercial roofs. In air conditioned buildings a saving in energy costs is often available.

Recommended for use on all types of correctly prepared roofs including cement and terracotta tile, fibrous cement, galvanised iron, and as a waterproofing membrane for concrete roofed buildings. HEAT SHIELD 10 may be applied over sound previously painted roofs.

Properties:

Gloss: Conforms to AS 2311 – Semi Gloss
Exterior durability: Excellent
Colour availability: White and specific colours only
Washability: Excellent
Coverage: 1 to 1.2 square metres per litre
Number of Coats: 2 coats recommended
Recoat time: 16 hours in normal conditions
Clean Up: Water

Surface Preparation:

Painted Roofs

Remove all unsound and flaking paint with scraping and sanding. Remove all chalk, dust, oil, grease and other contaminants. Repoint and repair roof as specified. Thoroughly clean and treat according to the standard work practice. Spot prime all bare surface.

Bare surface must be primed with the recommended primer before application of HEAT SHIELD 10.

Refer: Suggested Work Procedures for further information and for surfaces not described in this Data Sheet.

Priming Coats

Surface: Recommended Primers
Cement Tile: Glaze Primer/Sealer
Galvanised Iron Aluminium: Gal Iron Primer
Fibrous Cement: Fibro Seal
Concrete: Solvent Sealer
Previously Painted: Spot prime bare surface areas as above.

HEAT SHIELD 10 may be applied directly to correctly prepared previous paint in sound condition.

Application:

  • TWO full coats recommended
  • Apply liberally using airless spray or roller.
  • Keep rollers working freely by occasionally washing in clean water.
  • Ensure adequate ventilation during use.

OTHER INFORMATION

Stir in a circular lifting motion using a flat paddle. In hot windy conditions the first coat may be thinned with 3% water to assist application. Do not apply at surface temperatures below 10 degrees Celsius. Cease application if surface touch dry time exceeds 40 minutes. Do not begin application if rain or moisture condensation is imminent. Finish application by 3pm if overnight dew is expected.

 

Additional information

Weight 20 kg
Colour

ASH, Basalt, BEIGE, BLUE STEEL, BROWN 610, BROWN 660, BROWN 686, CHARCOAL, COTTASAND, DUBBO, EBONY, FAWN, GUM, HERITAGE GREEN, INDIAN RED, Ironstone, LEAF, LIGHT GREY, MID GREY, Monument, MOUNTAIN BLUE, MURBAU, OUTBACK, PALE TERRACOTTA, RED, RUST, SANTE FE, SLATE, SMOOTH CREAM, VALENCIA

SUNBOND - HEATSHIELD - Material Safety Data Sheet:

>> HEATSHIELD SDS

Related Products